All-Inclusive Manufactured Home

This handout is a compilation of some of the standard requirements based on the State Building Code and City Ordinance for projects of this type.  This information packet does not contain all the specific codes for construction and should only be used as a guide. The permittee is responsible to meet all code requirements applicable to each project. 

Submittals

• Permit Application-All-Inclusive Manufactured Home
• Site plan:
  • Showing location of proposed home, landing/stairs and any accessory structures.
  • Distances to lot/property lines
  • Building floor size 
  • Proposed foundation elevations
  • Grading and drainage plan for the site.
• Manufacturer’s Installation Instructions
• Plan showing anchoring/support system
• Plan for site-built landing/deck: materials and size
• Electrical Permit Application
• Hud Label photo
• MN Compliance Label photo

Required inspections

• Anchoring/Support system
• Poly
• Sewer/Water connection
• Dryer vent
• Gas line Manometer
• Furnace and/or AC Final
• Electrical Final
• Plumbing Final including flood test
• Final: including installation seal, smoke/CO detectors

 Municipal Code

155.27 R-6 Manufactured Home Residence:

 Permitted Uses

1.  Manufactured home parks subject to the site plan review pursuant to §155.51 and the following requirements.

a.      Each manufactured home shall be equipped with skirting around the entire perimeter of the home. The skirting shall be compatible with the principal structure and shall be functional and non-permanent. It shall be unlawful to construct, erect, attach, or cause to be constructed, erected, or attached any foundation, wall, or embankment under, around, or near any manufactured home in any manufactured home park in the city or to otherwise impede the removal of the manufactured home.

Click to view MN code requirements for Manufactured Homes