The most common and widely recognized method of warning is through the use of outdoor warning sirens. They are used by communities for a variety of purposes, including:
•Testing – 1st Wednesday of each month at 1p.m.
•Severe thunderstorms or tornados
•Major hazardous material spill
•Nuclear power plant incident
During emergencies residents will hear a 3-minute steady signal of the sirens. The sound range of a siren is about one mile, depending on the surrounding terrain.
When you hear the siren and are unsure what they are sounding for, go indoors and turn your radio or TV to one of the Emergency Alert Stations (all TV stations and most radio stations in the metro region are EAS equipped) and listen for essential emergency information. Do not call local fire or police agencies to ask why the sirens are sounding. If it is an emergency, they are busy getting equipment and manpower to the emergency scene.
No “all clear” signal is issued. That is why it is important to monitor your local radio and television stations during times of emergency for further information.
The Emergency Managers from each of Dakota County’s cities have determined the policy for sounding warning sirens. The Dakota Communications Center activates the sirens based on this siren policy.
Sirens are activated depending on the areas of the county included in the warning issued by the National Weather Service. Warnings can be on a city-by-city basis or for the entire county. The county does not make the decision of where to activate sirens.
Activation of the sirens can also be triggered by the Dakota Communications Center when notified by local law enforcement officers or a trained network of weather spotters.
The siren system was not designed to be a warning device for people inside their homes—it was designed for people that are outside of their homes, away from radios or televisions, which may be broadcasting warnings.
To add additional protection while you are inside, purchase a weather alert radio. These weather alert radios can be purchased at many retail stores. If you purchase a radio with the SAME feature (Specific Area Message Encoding), the receiver is capable of turning itself on from a silent mode when the signal for your area is sent out. These radios can be programmed for specific areas, so you do not receive alerts from areas far away.